Magnetic Key Holder Instruction

Installing a magnetic key holder is a quick and simple DIY project that keeps your keys organized and easy to find. Follow these step-by-step instructions for secure mounting.

Step 1: Mark the Mounting Spot

1. Choose a convenient location for your magnetic key holder (near the entrance is ideal).

2. Hold the holder against the wall and use a pencil to mark where the screw hole will go.

Step 2: Drill the Hole

1. Using the correct drill bit, drill a hole at the pencil mark.

2. Check the wall type:

   • Concrete or brick wall → use heavy-duty wall plugs.

   • Drywall/gypsum wall → use special drywall anchors.

   • Wooden wall → screws can be installed directly without plugs.

Step 3: Insert Wall Plug

1. Push the wall plug into the drilled hole until it sits flush with the wall surface.

2. Make sure it fits tightly for maximum stability.

Step 4: Screw the Magnetic Holder

1. Insert the screw into the wall plug and partially tighten it.

2. Position the magnetic key holder onto the screw mount.

3. Fully tighten the screw with a screwdriver until the holder is securely fastened.

Final Checks

• Ensure the magnetic holder is firmly attached to the wall.

• Test by placing keys on it—the magnet should hold them securely.

• Avoid overloading with heavy metal items beyond key weight.