Towel Holder Moon Instruction
The MOON towel holder combines modern design with easy installation. Follow these clear instructions to securely mount it on your bathroom wall.
Step 1: Mark the Drill Points on the Holder
-
Look at the back of the towel holder and note the screw hole positions.
-
Lightly mark these positions on the outer side of the holder to use as a guide.
Step 2: Position the Holder on the Wall
-
Place the towel holder against the wall at the desired height.
-
Use a spirit level to check that it is straight.
-
Draw a faint pencil line to mark the placement.
-
Through the back screw holes, mark the exact drill points on the wall.
Step 3: Drill Holes & Insert Wall Plugs
-
Drill holes at the marked points using the correct drill bit size.
-
Select wall plugs suitable for your wall type:
-
Concrete or brick walls → heavy-duty plugs.
-
Drywall/gypsum board → drywall anchors.
-
Wooden walls → screws can be inserted directly without plugs.
-
-
Insert wall plugs flush with the wall surface.
Step 4: Insert Screws
-
Partially screw the included screws into the wall plugs.
-
Leave approximately 2 mm of screw length sticking out from the wall.
Step 5: Mount the MOON Towel Holder
-
Align the towel holder slots with the protruding screw heads.
-
Push the holder onto the screws until it fits snugly.
-
Double-check with the level to confirm it sits straight.
Final Checks
-
Tug gently on the holder to ensure it is secure.
-
Tighten screws slightly if the holder feels loose.
-
Clean off pencil lines for a neat finish.
More inspiration
Balance toys Headphone stand Phone stand Table organizer
Bathroom hooks Kids furniture Pickle triangle Toilet paper holder
Bathroom mirrors Kids shelf Shelves Towel holder
Bathroom step stools Kitchen organizer Sofa arm tray Wine stand
Decorative wall Knife holders Spice rack Wooden shelf
Floating night stand Metal shelf Standing night stand
Hinterlassen Sie einen Kommentar